Pentair Pool Products PENTEK G2DT-01 Owner And Operational Manual page 6

1 Phase Simplex
Control Panel for Grinder
and Vortex Pumps
Owner and Operational Manual
Normal Float switch function as tank fills:
Alarm
Float
Start
Float
Start
Off
Abnormal Float switch function as tank fills:
Alarm
Float
Start
Float
Start
Off
Incoming Power Configurations:
Illustrations below shows how to connect power for the pump and the control circuits. Use two incoming power
sources. (A) is the pump circuit and (B) is the alarm circuit.
(A) Pump Power Configurations
Match according to pump voltage.
L2 is normally
Incoming
Power for
Pump
293 S. Wright St, Delavan, WI 53115 Phone: 1-866-973-6835 Fax: 800-426-9446
Pump Starts
Pump Starts Alarm Sounds,
Pump continues
to run
L1 is normally
BLACK
RED
Normal Float switch function as tank empty's:
Pump continues
Pump continues
to run
to run
Abnormal Float switch function as tank empty's:
Alarm turns off,
pump continues
to run
(B) Alarm/Control Power Configurations
L1 N
120 V
Pump turns off
Pump continues Pump turns off
to run
CONNECT ALL GROUNDS
TO GROUND LUG
Page 6 of 10
P10063VSM