Pentair Pool Products PENTEK G2DT-01 Owner And Operational Manual page 3

1 Phase Simplex
Control Panel for Grinder
and Vortex Pumps
Owner and Operational Manual
Connecting the Pump and Thermal Wires:
Your pump has 5 colored wires. White, Black, Red,
Blue and Orange
Pump Connection:
The White, Black and Red wires
connect to the terminal block labeled Pump
Connection.W=White, B=Black, R=Red
Pump 1 Thermal Sensor:
will be Blue and Orange. They are connected to the
terminal block labeled Pump 1 Thermal Sensor.
BL=Blue, OR=Orange
Testing the Thermal Sensor:
#1. Put one ohm meter probe on the Blue wire and
one on the Orange wire.
#2. If the reading is 0 or near 0 the thermal sensor
is good.
If the reading is OL the pump has been or currently
is overloaded.
0
293 S. Wright St, Delavan, WI 53115 Phone: 1-866-973-6835 Fax: 800-426-9446
The remaining two wires
Pump
Page 3 of 10
P10063VSM