Smartscan Mode - Uniden UBC 245XLT Trunk Tracker II Operating Manual

SmartScan Mode

You can automatically download frequencies, talk
groups,and fleetmaps from the Uniden National
Frequency Database server. After connecting the
scanner to a modem using the Scanner to PC or
Scanner to External Modem steps (see page 62), turn
the radio off. Press and hold REMOTE key and turn
the radio on. Then release the key.
the display.
1. The following screen
appears. (SmartScan
Mode) To select
SmartScan mode,
press
2. The following screen
appears.
3. Before starting the
frequency download,
you must enter your
zip code.
Using the keypad,
enter the ZIP code for
the area you will be
using your scanner.
For example if your
ZIP code is 02135. (US Only)
4. Press
code is stored into
non volatile memory.
Therefore, once you enter
ZIP code, you will be able
to skip this operation the next time.
Note: If you want to prevent some bands from being
overwritten by the frequency download, go to
Program Lock. (See page 66)
5. Press
scanner dials to the
database server.
(US Only)
or .
key, the ZIP
key. The
64
will flash on