Uniden UBC 245XLT Trunk Tracker II Operating Manual page 37

6. Press
MRN band.
When an active
channel is displayed,
the scanner will
alternate between the
frequency and the
Marine channel number.
7. Press
UHF CB band.
When an active
channel is displayed,
the scanner will
alternate between the
frequency and the
UHF CB channel number.
8. To exit SVC Scan
mode, press
During search of one of the preprogrammed service bands,
press
appears in the display. Press
or down one programmed frequency, or press
resume scanning.
Note: If you want to remain on a channel until a
responding transmission is received, press
activate the two second delay feature.
to scan the
to scan the
.
to stop the scan on a frequency. HOLD
1
1
or
33
2 3 4 5 6 7
2 3 4 5 6 7
to move up
to
8 9 10
8 9 10
UHF CB
to