Programming A Fleet Map - Uniden UBC 245XLT Trunk Tracker II Operating Manual

5. Press
The scanner returns
to Programming Bank
selecting mode.
Note: You will now begin to see Type I
Fleet-Subfleet IDs. For example, 100-12, 100-9,
000-12, 400-8, etc. See User Defined Fleet Maps
in the Appendix for more information about
Type I IDs.
How do you know if the preset map is correct? You'll have
to listen to see if you're following complete conversations.
If not, you should try another preset map.

Programming a Fleet Map

You may want to read User Defined Fleet Maps in the
Appendix before programming a fleet map. It contains a
detailed explanation of Scanner Fleet Map Programming,
as well as a table listing the Fleet Map Size Codes.
1. Select the Trunking
Programming mode
and the bank you
want to change.
2. Use
to choose E1, and
press
3. Press
4. Use
to choose USr.
5. Press
6. Use
to select the size code
for the first block.
.
or,
.
.
or
.
or
58