Table of Contents
Advertisement
1. Scroll to the Band Plan table entry you want to edit
and press .
E
2. Enter the base frequency for the table entry and
press .
E
3. Enter the spacing for the table entry (in kHz) and
press .
E
Repeat 1-3 for additional table entries.
Notes:
· For Explicit mode systems, leave all entries blank.
· There is no way to determine the correct entries
using the scanner (other than trial and error). You
must get this information from another source. Uniden
Australia and Uniden NZ do not have this information.
Editing the Fleet Map
(Motorola Systems Only)
Program System
Select the system
Edit Sys Option
Edit Fleet Map
For Motorola Type I systems, you must enter a system
fleet map in order for the scanner to properly track
and display talk group ID's. The fleet map is usually
included in the same resource that provided system
frequencies and talk group ID lists.
75
Programming/Editing Optional Settings
Advertisement
Table of Contents
