Operating Environment; Mechanical Specifications; Dimension Drawings - Siemens RUGGEDCOM RSL910 Installation Manual

RUGGEDCOM RSL910
Installation Guide
f
Cable Type
g
Wiring Standard
h
Maximum Distance
i
Isolation
e
Auto-negotiating.
f
Shielded or unshielded.
g
Auto-crossover and auto-polarity.
h
Typical distance. Dependent on the number of connectors and splices.
i
RMS 1 minute.
Section 5.4

Operating Environment

The RUGGEDCOM RSL910 is rated to operate under the following environmental conditions.
Ambient Operating Temperature
Ambient Storage Temperature
Ambient Relative Humidity
Maximum Altitude
j
Measured from a 30 cm (12 in) radius surrounding the center of the enclosure.
k
Operating temperature may vary based on the limitations of installed SFPs. Refer to the RUGGEDCOM SFP Transceivers Catalog for SFP temperature ratings.
l
Non-condensing.
Section 5.5

Mechanical Specifications

Weight
Ingress Protection
Enclosure
Section 5.6

Dimension Drawings

NOTE
All dimensions are in millimeters, unless otherwise stated.
Operating Environment
> CAT 5
TIA/EIA T568A/B
100 m (328 ft)
1.5 kV
jk
-40 to 85 °C (-40 to 185 °F)
-40 to 85 °C (-40 to 185 °F)
l
5% to 95%
2000 m
1.2 kg (2.7 lbs)
IP30
20 AWG Galvanized Steel
Chapter 5
Technical Specifications
31