Table of Contents
Advertisement
Symptom
The cordless handset can't make
or receive calls.
The handset doesn't ring or
receive a page.
Severe noise interference.
Caller ID does not display.
You cannot register the handset
at the base.
The handset doesn't
communicate with other
handsets.
An extra handset can't join
the conversation.
The base can't join the
conversation
Room Monitor feature does not
work.
[ 7 9 ] T R O U B L E S H O O T I N G
• Make sure that you are not too far from the base.
• Make sure the line is not in use. If an outside call is already using a line, you cannot use that line to
make another outside call.
• De-register the handset (see "De-register the Handset" on page 17) and register the handset (see
"Registering Expansion Handsets" on page 16).
• Make sure that you are not too far from the base.
• Charge the batteries in the handset for 15-20 hours by placing the handset on the charging cradle.
• De-register the handset (see "De-register the Handset" on page 17) and register the handset (see
"Registering Expansion Handsets" on page 16).
• Keep the handset away from microwave ovens, computers, remote control toys, wireless
microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances.
• Move to another location or turn off the source of interference.
• The handset was picked up before the second ring.
• The call was placed through a switchboard.
• Contact your service provider to verify the Caller ID settings.
• Charge the battery pack for 15 hours.
• De-register the handset (see "De-register the Handset" on page 17) and register the handset (see
"Registering Expansion Handsets" on page 16).
• De-register the handset (see "De-register the Handset" on page 17) and register the handset (see
"Registering Expansion Handsets" on page 16).
• Make sure that you have registered all handsets.
• Make sure there are not two stations already using the 3-way conference feature.
• Make sure that another station is not in privacy mode.
• Make sure that another station is not in privacy mode.
• Make sure to place the handset(s) within the range of the base.
Suggestion
w w w . u n i d e n . c o m
Advertisement
Table of Contents
