Uniden UIP1869V Owner's Manual page 13

• Enter http://192.168.15.1 (the UIP 1869V broadband telephone system's default IP
address) in the address field of your browser and hit the ENTER key.
• A screen with fields for your username and password will appear. Enter "admin" in both
fields for now (you should set a new password later using the Advanced tab's user
configuration screen). Then click "OK".
• Select the Setup Tab at the top of the screen, then select "WAN Configuration" from the
menu on the left. This opens the WAN configuration Setup Screen.
• In the pull down menu labeled "WAN Interface Type" (see image below) select PPPoE. This
opens the PPPoE configuration screen.
• Enter the username, password and service name (if required) provided by your ISP. This is
the same info you enter every time you log in.
• Click "Apply". When asked if you want to save the UIP 1869V configuration, click "Yes".
• When the lights on the UIP 1869V stop flashing, check for Internet access by browsing to
a web page.
w w w . u n i d e n . c o m
G E T T I N G S T A R T E D [ 1 2 ]