Table of Contents
Advertisement
Connect the charger
The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the charger.
1) Connect the AC adapter to the DC IN 9V
jack and to a standard 120V AC wall outlet.
Caution: To avoid risk or fire or shock, use
only the included AC adapter.
2) Set the charger on a desk or tabletop, and
place the handset in the charger with the
keypad facing forward.
3) Make sure that the charge LED illuminates.
If the LED does not illuminate, check to see
that the AC adapter is plugged in and the
handset makes good contact with the base
charging contacts.
4) Charge the handset battery pack for at least 15-20 hours before using your new cordless
handset for the first time.
w w w . u n i d e n . c o m
note
For maximum range:
•Do not hold the
handset where you
might block the signal.
Antenna
Correct
Incorrect
•Metal and reinforced
concrete may affect
cordless telephone
performance.
G E T T I N G S T A R T E D [ 1 4 ]
Advertisement
Table of Contents
