Table of Contents
Advertisement
Operation
Making and receiving calls
If you press talk/flash on the handset while the other handset is in use, you will hear a
beep and the handset will return to the standby mode.
Security code
You can change the digital security code, only from the original handset.
Memory locations (Redial memory/Dynamic memory locations)
Memory locations in the original handset and the second handset are independent.
Page
If you press any key on a handset while paging, the paging sound from the other handset
will stop as well.
Caller ID
• When you receive a CIDCW during a call, the Caller ID information will not be displayed
or stored in the other handset.
• To display CIDCW on the second handset, you must turn On the CIDCW or CW Deluxe on
the original unit.
Others
• You can't use or purchase the second handset as an alternative of the original handset.
• Save this owner's manual. The TXC400 owner's manual describes only the instructions
specific to the second handset. For detailed operation, refer to this owner's manual
(for TRU446).
E X PA N D I N G Y O U R P H O N E
[ 39 ]
Advertisement
Table of Contents
