6) "
pointer to one of the Distinctive Ring options, then press select/ch.
If you choose not to store a "
simply select the "
7) "
" appears. Then press - to move the pointer to select
the speed dial location (10 locations: SPD1-SPD0).
If you choose not to store the name/number as a Speed Dial,
simply select the "
8) Press select/ch. You will hear a confirmation tone and "
appears on the display.
Steps for Entering Names and Special Characters
Refer to the letters on the number keys to select the desired characters. With each press of
a number key (0-9), the displayed character appears in the following order: Upper case
letters first, lower case letters next and finally the number corresponding to the key.
keys
1
2
" appears. Then press + or - to move the
" option.
" option.
Number of times key is pressed
3
4
5
6
",
"
7
8
9
(blank)
If you select a speed
dial location where a
number is already
stored, the new
number will replace
the old number, and
the old number will
be stored as a
phonebook location.
P H O N E B O O K
[ 25 ]