Table of Contents
Advertisement
[ 26 ]
P H O N E B O O K
If you make a mistake while entering a name
Use pb/rocket/< or cid/> to move the cursor to the incorrect character. Press xfer/del to
erase the wrong character, then enter the correct character. To delete all characters, press
and hold xfer/del.
For example, to enter Uniden:
1) When the phone is in the standby mode, press pb/rocket/<. The handset displays the
number of phonebook locations you have stored, and how to search and store the
phonebook locations.
2) Press select/ch, then "
3) Press 8 twice.
4) Press 6 five times.
5) Press 4 six times.
6) Press 3 four times, then press cid/> to move the cursor to the right.
If the next character uses the same number key, you must press cid/> to move the cursor over.
Otherwise the next time you press the number key, it changes the character that was previously set.
7) Press 3 five times.
8) Press 6 five times.
9) When finished, press select/ch.
To continue to store the telephone number, proceed to step 5 on page 24.
" appears.
Advertisement
Table of Contents
