Uniden TCX905 Owner's Manual page 7

MODEL
• Remove the battery compartment cover from the
bottom of the main base.
• Press and hold the
battery compartment until the base LEDs start
ELT560
blinking.
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
• Disconnect the base AC adapter.
• While holding the
Adapter.
TRU8860
TRU8865
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
• Disconnect the base AC adapter.
• While holding the
Adapter.
TRU8866
TRU8885
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
• Disconnect the base AC adapter.
• While holding the
AC Adapter.
TRU8880
• On the handset, press and hold
reads HANDSET REGISTERING and you hear a
beep.
2. When REGISTRATION COMPLETE. is displayed; the handset
has been registered to the base. If REGISTRATION FAILED.
appears, please try these steps again.
DIRECTIONS:
button located in the
Registration
[find handset]
[flash/find hs]
[find hs/intercom]
6
[#]
until the display
, reconnect the AC
[#]
until the display
, reconnect the AC
[#]
until the display
, reconnect the
[#]
until the display