Call Waiting; Placing A Call On Hold - Uniden UIP 160P Series Owner's Manual

Call Waiting

If a call waiting tone sounds while you are on a call,
press talk/flash on the handset to accept the waiting
call. There is a short pause, and then you will hear the
new caller. To return to the original caller, press talk/
flash again.

Placing a Call on Hold

You can place a call on hold for 5 minutes. When 5 minutes has passed, the call is
disconnected, and the phone returns to standby mode.
1) During a call, press intcom/hold. The call will be put
on hold.
If you leave a call on hold for more than 10 seconds, the
display screen will read,
2) To talk to the caller, press talk/flash or
back to the call.
w w w . u n i d e n . c o m
Ho ld .
on a handset. The phone will return
note
While a call is on
hold, CIDCW can not
be received.
U S I N G Y O U R P H O N E [ 3 2 ]