Uniden UIP 160P Series Owner's Manual page 16

De-register the Handset
You can deregister the handset's ID from the main base unit or the base ID from the handset. You will
usually only deregister the handset if you want to change the base you use it with, if you are having a
problem with your phone, or if you need to change the digital security code. The digital security code is
an identification code used to connect the handset and the base unit. Normally, setting the code is not
necessary. In the rare situation that you suspect another cordless telephone is using the same security
code, you can change the code by de-registering and reregistering all handsets.
1) In standby mode, press the MENU soft key and select Deregister HS. Then,
press the OK soft key.
∧
2) Press cid/vol/
When de-registration is complete you will hear a confirmation tone, and
D e re g is t ra ti o n C om p le te
3) After de-registering the handset, place the handset to the base to register. You must re-register the
handset before you can use it.
[ 1 5 ] E X P A N D I N G Y O U R P H O N E
D er e gi s te r H S?
∨
or redial/p/vol/ to select
appears.
appears.
and then the OK soft key.
Y e s
w w w . u n i d e n . c o m