Connect The Base Unit And Charge The Handset - Uniden SS E15 Series Owner's Manual

B. Connect the Base Unit and Charge the Handset
1) Connect the AC adapter to the
jack and to a standard 240V AC wall outlet.
• Connect the AC adapter to a continuous
Use only the
! • Place the base unit close to the AC
supplied
AAD--041S
AC adapter.
Do not use
any other AC
adapter.
Do not place
!
the power cord
2) Place the handset in the base unit.
where it
creates a trip
hazard or
3) Make sure that the
where it could
If the LED does not illuminate, check to see that the AC adapter is plugged in
become
and the handset makes good contact with the base charging contacts.
chafed and
create a fire or
4) Charge the handset battery pack for at least 15-20 hours before using
electrical
hazard.
your new cordless telephone for the first time!
capacity of your battery pack, DO NOT plug the telephone cord into the base
unit and wall jack until the battery is fully charged.
DC in 9V
power supply.
outlet so that you can unplug the AC
adapter easily.
The rechargeable battery is already installed in your phone.
charge/in use
[6]
LED illuminates.
To maximize the charge