If the handset battery pack
is completely discharged
or the battery pack
removed, the digital
security code will be lost.
If this happens, a new
security code is set
automatically the next
time the battery pack
is charged.
18
Changing the digital security code
The digital security code is an identification code used to connect the
handset and the base unit. Normally, setting the code is
not necessary.
The first time you charge your handset, the security code is
automatically set. (See page 2.)
In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
1
Remove the handset from the base unit.
Press
page/find
2
While the handset is beeping, place the
handset in the base unit.
The paging tone stops.
Leave the handset on the base more
than 3 seconds. A new random security
code is set.
.