Gdl 69A Functional Check - Garmin G1000 Checkout Procedure

GDL 69A Functional Check

3.14
This section verifies correct installation in the aircraft. It does not activate the GDL 69A XM data link
radio. If the XM Radio is activated, the channel list will contain more channels than the three that are
shown for a radio that has not been activated.
Complete instructions for activating the XM data link can be found in document 190-00355-04 "GDL
69/69A XM Satellite Radio Activation Instructions".
1. Select the AUX – XM RADIO page on the MFD.
2. Verify that you can increment and decrement the channels (the white arrow to the left of the channel
list indicates the currently selected channel). Select channel 1 when complete.
3. Verify that you can increase and decrease the XM radio volume (the volume bar at the bottom of the
screen will show changes to the volume level). Set the volume to the mid position when done.
4. Plug a set of headphones into each passenger station and verify that you can hear the XM radio
playing in both channels. The volume level may be adjusted to a comfortable level at this point.
5. On GMA1 and GMA 2, select MUSIC.
6. Plug a set of headphones into the pilot and co-pilot stations and verify that you can hear the XM radio
playing in both channels.
Page 3-22 G1000/GFC 700 Post Installation Checkout Procedure - Hawker / Beechcraft King Air C90
Revision 5
NOTE
190-00682-00