Adf - 60 Option Configuration; Dme 42 Option Configuration - Garmin G1000 Checkout Procedure

2.8
ADF – 60 Option Configuration
1. With PFD1 in configuration mode, use the large FMS knob to select the SYSTEM group. Select the
"SYSTEM UPLOAD" page using the small FMS knob.
2. Activate cursor and rotate inner knob to display drop down menu. Highlight C90-Options and press
PFD1 ENT key.
3. Verify cursor drops down to the file box. Rotate the inner FMS knob to view the list of available C90
options.
4. Use the FMS inner knob to select "King Air C90 – ADF - 60 Option". Press ENT.
5. Verify the "King Air C90 – ADF - 60 Option" configuration file is displayed in the "File" window.
Press "LOAD".
6. Monitor load progress. Verify software load completes without errors as indicated by the following:
7. Green "PASS" in Configuration column for GIA2, GMA PIL, and GMA COPIL.
8. "Upload Complete.............COMPLETE" in the summary box.
9. Select "ENT" to acknowledge upload complete.
10. Deactivate cursor.
2.9

DME 42 Option Configuration

1. With PFD1 in configuration mode, Select the "SYSTEM UPLOAD" page using PFD1 small FMS knob.
2. Activate cursor and rotate inner knob to display drop down menu. Highlight C90 -Options and press
ENT key on PFD1.
3. Verify cursor drops down to the file box. Rotate the inner FMS knob to view the list of available C90
options.
4. Use the FMS inner knob to highlight "King Air C90 – DME-42 Option". Press ENT key on PFD1.
5. Verify the "King Air C90 – DME-42 Option" configuration file is displayed in the "File" window. Press
"LOAD".
6. Monitor load progress. Verify software load completes without errors as indicated by the following:
7. Green "PASS" in Configuration column for GIA1, GMA PIL and GMA COPIL.
8. "Upload Complete.............COMPLETE" in the summary box.
9. Select "ENT" to acknowledge upload complete.
10. Deactivate cursor.
G1000/GFC 700 Post Installation Checkout Procedure – Hawker / Beechcraft King Air C90
190-00682-00
Page 2-15
Revision 5