Table of Contents
Advertisement
Making a Call from Speed Dial Memory
)
With the phone in standby, press [memory] to open the speed dial list.
2)
Enter the number ([0] – [9]), or press [vol/ / ] or [vol/ / ] to select
the speed dial number you would like to dial.
3)
Press [talk/flash] to dial the number.
Note: You can also press [talk/flash] before you access the
speed dial memory. When you come to the phone number you
want to dial, press [select/channel].
To cancel speed dialing
Press [end] to return to standby. If accessing the list during an active call,
you can press [memory] to exit the list immediately. If no key is pressed
for thirty seconds, the handset will exit the speed dial list automatically.
Note: Pressing [end] to exit the speed dial list during a call will
disconnect the call immediately.
Transferring a Call
You can transfer a call from one handset to another. Only one handset
at a time can talk with an outside caller. While one handset is in use, the
other handset cannot go off hook to listen to conversations or make an
outgoing call.
During a call, press [delete/transfer]. The call will automatically be
)
placed on hold and the transfer tone sounds.
To cancel the transfer and return to the caller, press [delete/transfer]
or [talk/flash] on the handset.
2)
When the other handset receives the call, the transfer tone stops.
To receive a transfer call
Do one of the following operation.
•
Pick up the handset and press [talk/flash].
•
Pick up the handset from the cradle (when AutoTalk is set to on).
•
Press any number key, [ /tone/ ] or [#/ ] (when AutoTalk is set to on).
Note: If you transfer a call and it is not picked up after five
minutes, the call will be disconnected.
Redialing the Last Dialed Number
)
Pick up the handset from the
cradle.
2)
Press [talk/flash].
3)
Listen for the dial tone.
4)
Press [redial/pause].
Adjusting the Handset Earpiece Volume
To change the earpiece volume, press [vol/ / ] or [vol/ / ] during a call.
Adjusting the Ringer Tone and Volume
Changing the Base Ringer
The base has three ringer volume settings: high, low, and off. You can
change the ringer volume while in standby or while an incoming call is
ringing. Press [ringer] repeatedly until the desired ringer option appears
on the display ([
the current volume level. Even when the base ringer is turned off, the
handset will still ring.
Changing the Handset Ringer
Your phone has five different ringer tone/volume combinations you can
choose from. With the phone in standby, press [vol/ / ] or [vol/ / ].
To turn the ringer off, select RINGER OFF.
Muting the Base Ringer
To mute the ringer during an incoming call, press [
ringer and the answering machine speaker will both be muted for this call
only; the ringer will sound with the next incoming call. To turn the ringer
back on for this call, press [ringer].
Muting the Handset Ringer
If the handset is off the cradle while an incoming call is ringing, simply
press [end] to mute the incoming ring. The ringer will sound with the next
incoming call.
Note: You can only mute the handset ringer if the handset is off
the cradle when the phone starts ringing.
7) Using Caller ID and Call Waiting
If you subscribe to Caller ID from your phone company, your phone will
show you the caller's phone number and name (if available) whenever a
call comes in. If you subscribe to both Call Waiting and Caller ID, the
phone also shows you the name and the number of any call that comes in
while you're on the line.
The date and
The date and
time received
time received
Caller's name
Caller's name
Caller's phone number
Caller's phone number
If your telephone provider supports seven-digit dialing, you can save
your local area code so it does not display in the Caller ID list. See
"Programming Your Area Code" in Section 4 for more information.
Note: If you answer a call before the Caller ID message is
received (for example, before the second ring), the Caller ID
message will not appear.
] High, [
] Low, [
)
Pick up the handset from the
cradle.
OR
Press [redial/pause].
2)
3)
Press [talk/flash].
] off). You hear the ringer at
] (play/stop). The
Advertisement
Table of Contents
