Settings Menu; Tones; Dial Mode - Uniden DECT160 Owner's Manual

Settings menu

Tones

You can switch on or off the tones for key touch,
confirmation, call waiting, and out-of-range alarm.
For example, when the key tone is set to ON, you
will hear a tone each time you press a keypad
button.
1 Press to access the main menu.
2 Press or until
displayed and press
3 Press until
4 Press or to select the option you want
Press .
is
.
is displayed. Press
5 Press
and press
select from pattern 1-3 or off and press
6 Press

Dial mode

You can set your phone to use either Tone or
Pulse dialing. The pre-set setting is TONE dialing,
where you will hear a tone beep each time you
dial a number. Most modern exchanges and
switchboards use Tone dialing, so you should not
need to change this setting. Only change it if your
.
switchboard uses Pulse dialing or if you cannot
make a call using Tone dialing.
1 Press
2 Press
displayed and press
3 Press
press
4 Press
press
[26]
or to display either
to confirm. For
to exit and return to standby.
to access the main menu.
or until
.
or to select
.
or to display
. The current setting is displayed.
or
tone,
.
is
and
and