Table of Contents
Advertisement
Introduction Important Safety Information
Introduction
Land Pride welcomes you to the growing family of new
product owners. This Parallel Arm Rotary Cutter has
been designed with care and built by skilled workers
using quality materials. Proper assembly, maintenance,
and safe operating practices will help you get years of
satisfactory use from this implement.
Application
The Hydraulic Parallel Arm Rotary Cutters are designed
and built by Land Pride to provide excellent cutting
performance on ditch banks and other sloping areas
adjacent to right-of-ways, lakes, ponds, and streams.
They are designed to work equally as well in and around
areas of restricted access such as over or under fences,
guardrails, low overhanging branches, tree limbs, and
hedges. These units perform extremely well in tall grass
cutting applications and will easily cut through standing
brush up to two inches in diameter. An optional cutter
head equipped with two forward and one rear gauge
wheel is also available for customers who want to
maintain a constant cutting height with minimal control
lever manipulation.
The RCP2660 and RCPM2660 cutters are adapted for
Category 2 or 3 three-point hitch mounting on 75 hp.
minimum. tractors weighing 8,000 lbs. or more.
The RCP3060 and RCPM3060 cutters are adapted for
Category 2 or 3 three-point hitch mounting on 95 hp.
minimum. tractors weighing 12,000 lbs. or more.
The Hydraulic drive requires 540 rpm input power take-
off speed for RCP2660 & RCP3060 models and 1000
rpm for RCPM2660 & RCPM3060 models. Depending
upon hydraulic configuration, one, two, or four duplex
hydraulic outlets are required on the tractor to operate the
cutter's parallel arms and deck angle.
See "Specifications & Capacities" on page 62
and "Features & Benefits" on page 64 for additional
information and performance enhancing options.
Using This Manual
•
This Operator's Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To order a new Operator's or Parts Manual, contact
your authorized dealer. Manuals can also be
downloaded, free-of-charge, from our website at
www.landpride.com
Terminology
"Right" or "Left" as used in this manual is determined by
facing the direction the implement will operate while in
use unless otherwise stated.
10
RCP2660, RCPM2660, RCP3060 & RCPM3060: Parallel Arm Rotary Cutter: 316-111M:
Table of Contents
Definitions
IMPORTANT: A special point of information related
to the following topic. Land Pride's intention is this
information must be read & noted before continuing.
NOTE: A special point of information that the
operator should be aware of before continuing.
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
The parts on your Parallel Arm Rotary Cutter have been
specially designed by Land Pride and should only be
replaced with genuine Land Pride parts. Contact a Land
Pride dealer if customer service or repair parts are
required. Your Land Pride dealer has trained personnel,
repair parts, and equipment needed to service the
implement.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Land Pride dealer. For
location of your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
30033
11/2/18
Advertisement
Table of Contents
