Beko DRYPOINT AC Series Installation And Operating Manual page 38

Installation and operating manual
4. Loosen the screws of the slider. An audible signal indicates that the housing is fully depressurised! After all
pressure has been released, open the slider.
5. Unscrew the bottom part of the housing.
6. Remove the spent filter element.
4
2
7. Insert the new filter element. Caution: The upper end cap must be installed according to the angle in the
element seat.
8. Mount the bottom part of the housing.
7
38
5
1
1
2
DRYPOINT AC 410 – 495 | DRYPOINT
®
6
8
AC 410 – 495 MS
®
EN
1
2