Section 2: Power Supply - Grizzly Extreme Series G0514X Owner's Manual

SECTION 2: POWER SUPPLY

Availability
Electrocution,
equipment damage may
occur if machine is not
correctly grounded and
connected to the power
supply.
Full-Load Current Rating
G0514X, G0514X2, & G0514X2B:
Full-Load Current Rating at 220V ..... 12 Amps
G0514X3:
Full-Load Current Rating at 220V ..... 10 Amps
Full-Load Current Rating at 440V ....... 5 Amps
Serious injury could occur if you connect
the machine to power before completing the
setup process. DO NOT connect to power
until instructed later in this manual.
Circuit Information
fire, or
For your own safety and protection of
property, consult an electrician if you are
unsure about wiring practices or electrical
codes in your area.
Note: The circuit requirements listed in this man-
ual apply to a dedicated circuit—where only one
machine will be running at a time. If this machine
will be connected to a shared circuit where mul-
tiple machines will be running at the same time,
consult a qualified electrician to ensure that the
circuit is properly sized for safe operation.
G0514X, G0514X2, G0514X2B
Circuit Requirements
Nominal Voltage Range ................. 220V–240V
Cycle ..........................................................60 Hz
Phase ........................................... Single-Phase
Circuit Size (G0514X & G0514X) .........15 Amps
(G0514X2B) ......................20 Amps