Table of Contents
Advertisement
info@Fluke-Direct.com
For Interval monitoring: The Product counts down from the time interval, wakes up
automatically and makes a measurement, and then saves the reading. The Product then goes
to sleep, restarts the count down and repeats the process. The feature automatically turns off
when the memory is full or you turn off the feature. To make repeated measurements at a
specified interval:
1.
In HOLD status, push SEL for >3 seconds to enter in the second-level menu.
Push SEL until AUTO CAPTURE and INTERVAL show on the display.
2.
3.
Push SET to switch the feature on or off.
4.
When the feature is on, push or to adjust the displayed value as necessary. The
displayed value is the start value of the countdown counter.
5.
Push SEL several times or pull the trigger to exit the setup.
•
If the Interval monitoring feature is turned on when Auto Capture is
already on, both features work together. The automatic measurement will
be at the time set for Auto Capture. This allows the user to select the
specified time to start the Interval monitoring measurement.
Fluke-Direct
IR Thermometer
Note
.com
Overview
21
1.888.610.7664
Hide quick links:
Advertisement
Table of Contents
