Select Age Range; To Set A Preferred Age Range - Braun BNT 400 Instructions Manual

3

Select age range

Select age with AgeSmart button.
TM
Device will start cycling through the age ranges, highlighting the
3 ranges you may select; 0-3 months ( ), 3-36 months ( ),
or 36+ months ( ).
Press the AgeSmart button to toggle through the age ranges
TM
until you select the age appropriate for the individual.
To set a preferred age range: (Locking an age setting)
To save a preferred age range, so that the preferred age range
will be automatically selected when the thermometer is turned
ON, follow these steps:
A. Make sure the thermometer is OFF.
B. Press and hold the power button ( ) and AgeSmart
TM
button ( ) for 4 seconds. The unit will turn on, displaying a
yellow backlight and the 3 age range icons will flash.
C. Press the AgeSmart ( ) button. The age range selected
TM
will flash. Press the AgeSmart button until your desired age range is flashing on
TM
the display.
D. Once the desired age range is selected, stop pressing the button and wait 3
seconds. The green backlight will illuminate, and the selected age range will turn
solid. After 4 seconds, the thermometer will turn off.
E. The preferred age range will be automatically selected when the thermometer
is turned ON.
Note: With a preferred age range, an alternate age range can be selected during
each use, by pressing the AgeSmart button when the age range icon appears,
TM
after the thermometer is turned ON.
F. To remove the preferred age range, open the battery door, remove the
batteries, wait 30 seconds and re-insert the batteries.
IMPORTANT: To ensure accurate readings, you must always take a temperature
reading in the age range that corresponds to the individual's age.
8