Registering Ownership Of Your Officeconnect Remote; Pre-Installation Requirements - 3Com OfficeConnect Remote 510 User Manual

Registering Ownership Of Your OfficeConnect
Remote
A warranty registration card is enclosed in the box
with your OfficeConnect Remote. Please take a few
moments before commencing the installation to fill
in the card and post it to us.

Pre-installation Requirements

Before you install your OfficeConnect Remote you
will need the following:
A suitable cable for connection to your LAN (or
workstation if only a single workstation is attached to
this unit).
Although the OfficeConnect Remote has two LAN
connections (10Base2 and 10BaseT), only one port
can be used at a time.
A standard ISDN line wall socket to connect the
ISDN cable to the ISDN port of the OfficeConnect
Remote. If a suitably sited wall socket is not already
available, then contact your telecommunications
supplier for assistance.
A suitable cable to connect to your ISDN socket.
A 1.5 meter ISDN cable is supplied with this unit.
The ISDN telephone number of the remote ISDN
unit in order to carry out the connection
configuration procedure.
A suitable WAN cable if you are connecting to the
remote site over a leased line.
Introduction 1-5