Replacing The Console Top With Electronics Assembly - Bowflex TreadClimber TC5 Service Manual

Part Replacement

Replacing the Console Top with Electronics Assembly

To reduce the risk of electrical shock or unsupervised usage of the equipment, always remove the batteries from the machine and wait 5
!
minutes before cleaning, maintaining or repairing the machine.
Tools Required: #2 Phillips Screwdriver
1. Disconnect the Speed Sensor Cable from below the Console Assembly.
2. Remove the Speed Sensor Cable from the tabs on the the Console Assembly.
3. Remove the 8 indicated Phillips head screws securing the Console Top with
Electronics Assembly to the Console Shroud.
4. Carefully remove the Console Top with Electronics Assembly from the front of
the Console Shroud.
5. Install the new Console Top with Electronics Assembly.
6. Reinstall the 8 Phillips head screws.
7. Connect the Speed Sensor Cable and route the cable behind the tabs.
6