D-Link DWL-3200A Command Line Interface Reference Manual page 9

The following is a complete list of the Command Line Interface (CLI) commands along with their respective arguments.
Config Commands:
Select WLAN Adapter to configure. Only WLAN 1 is available for
config wlan
configuration. This command is not necessary.
Delete Commands:
del acl Delete specified Access Control List entry
del wdsacl Delete specified WDS ACL entry: 1-8
del key Delete specified Encryption key
DHCP Server Help Command:
dhcps help Display DHCP Server Command Help
dhcps state get DHCP Server state
dhcps state <on|off> set to on or off DHCP Server
dhcps dynamic info get current settings
dhcps dynamic ip set start ip
dhcps dynamic mask set netmask
dhcps dynamic gw set gateway
dhcps dynamic dns set dns
dhcps dynamic wins set wins
dhcps dynamic range set range
dhcps dynamic lease set lease time (sec.)
dhcps dynamic domain set domain name
dhcps dynamic state set state
dhcps dynamic map get mapping list
dhcps static info get setting from <0-255> to <0-255>
dhcps static ip set static <id> pool start ip
dhcps static mask set static <id> pool netmask
dhcps static gw set static <id> pool gateway
802.11 a/g Dual Band Access Point Command Line Interface Manual
Access Point CLI command
Function
7
3
Syntax
config wlan [0:1]
del acl [1-16]
del wdsacl [1-8]
del key [1-4]
dhcps help
dhcps state
dhcps state [on|off]
dhcps dynamic info
dhcps dynamic ip <x.x.x.x>
dhcps dynamic mask <x.x.x.x>
dhcps dynamic gw <x.x.x.x.>
dhcps dynamic dns <x.x.x.x>
dhcps dynamic wins <x.x.x.x>
dhcps dynamic range [0-255]
dhcps dynamic lease [60-31536000]
dhcps dynamic domain <string..>
dhcps dynamic state [on:off]
dhcps dynamic map
dhcps static info [0-255] [0-255]
dhcps static <id> ip <x.x.x.x>
dhcps static <id> mask <x.x.x.x>
dhcps static <id> gw <x.x.x.x.>
CLI C
OMMANDS