D-Link DWL-3200A Command Line Interface Reference Manual page 16

Set WMM (EDCA) parameters used by STAs in this BSS
set wmmParamBss ac
Set WMM (EDCA) parameters used by this AP
set wmmParam ac
set smtpserver Set SMTP Server
set smtpsender Set SMTP Sender Account
set smtprecipient Set SMTP Recipient Email Address
set vlanstate
Enable or Disable VLAN
set nativevlan Set Native Vlan Tag
set Vlantag Set VLAN Tag
set multi-vlantag Set VLAN Tag for Multi-SSID
set multi-state Enable or Disable Multi-SSID Features
set multi-ind-state Enable or Disable specifically Mulit-SSID
set multi-ssid Set Service Set ID for Multi-SSID
set multi-ssidsuppress Enable or Disable to broadcast SSID of Multi-SSID
set multi-wmm Enable or Disable WMM mode of Multi-SSID
set multi-authentication Set Authentication Type for Multi-SSID
set multi-cipher Set Cipher for Multi-SSID
set multi-encryption Set Encryption Mode for Multi-SSID
set multi-keyentrymethod Select Encryption Key Entry Method for Multi-SSID
set multi-key default Set Default Encryption Key
set multi-passphrase Set PassPhrase for Multi-SSID
set multi-acct-state Enable or Disable the Accounting Feature of Mulit-SSID mode
set multi-idv-acct-sta Enable or Disable the Individual Accounting Feature of Mulit-SSID mode set multi-idv-acct-sta [disable:enable]
set multi-idv-acct-stv Set Individual Accounting Server of Mulit-SSID mode
set multi-idv-acct-port Set Individual Accounting Server port of Mulit-SSID mode
802.11 a/g Dual Band Access Point Command Line Interface Manual
14
set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs]
[txOpLimit] [acm]
Expanation:
AC number: 0->AC_BE
1->AC_BK
2->AC_BK
3->AC_BK
Exampble:
set wmmParamBss ac 0 4 10 3 0 0
set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs]
[txOpLimit] [acm] [ack-policy]
Expanation:
AC number: 0->AC_BE
1->AC_BK
2->AC_BK
3->AC_BK
set smtpserver <DNS name::xxx.xxx.xxx.xxx>
Explanation: <xxx.xxx.xxx.xxx> is IP address
set smtpsender <sender Email address>
set smtprecipient <recipient Email address>
set vlanstate [disable:enable]
Note: Must Enable Multi-SSID firstly
set nativevlan
set vlantag <tag value>
set multi-vlantag <tag value> [index]
set multi-state [disable:enable]
set multi-ind-state [disable:enable] [index]
set multi-ssid [index] <ssid name>
set multi-ssidsuppress [disable:enable]
set multi-wmm [disable:enable]
set multi-authentication [open-system:shared-key:wpa:wpa-
psk:wpa2:wpa2-psk:wpa-auto:wpa-auto-psk] [index]
set multi-cipher [wep:aes:tkip:auto]
set multi-encryption [disable:enable] [index]
set multi-keyentrymethod [hexadecimal:asciitext] [index]
set multi-key default
set multi-passphrase [index] <passphrase>
set multi-acct-state [disable:enable]
set multi-idv-acct-str [index]
set multi-idv-acct-port [index]