D-Link DWL-3200A Command Line Interface Reference Manual page 17

Set Telnet Access/SSL Mode to enabled or disabled
set telnet
set timeout Set Telnet Timeout in seconds, 0 is never and 900 seconds is the
maximum <0-900>
Time Display Command:
Timeofday Displays the Current Time of Day
Version Display Command:
version Displays the currently loaded firmware version
SNMP Commands:
snmp adduser Add User To SNMP Agent
snmp deluser Delete User From SNMP Agent
snmp showuser Show User list In SNMP Agent
snmp setauthkey Set User Auth Key
snmp setprivkey Set User Private Key
snmp addgroup Add User Group
snmp delgroup Delete User Group
snmp showgroup Show SNMP Group Settings
snmp addview Add User View
802.11 a/g Dual Band Access Point Command Line Interface Manual
15
set telnet <0:1:2>
Explanation:
0=disable telnet and enable SSL:
1=enable telnet and disable SSL:
2 = disable both telnet and SSL>
set timeout <0-900>
timeofday
Note: Need to set up SNTP/NTPserver firstly
version
snmp adduser <Username> <GroupName> [AuthProtocl] [Authkey]
[PrivProtocl] [PrivKey]
Explanation:
AuthProtocl: 1 Non, 2 MD5, 3 SHA
Autheky: Keystring or none
PrivProtocl:1 none, 2 DES
PrivKey: Keystrig or none
snmp deluser <username>
snmp showuser
snmp setauthkey <username> <Authkey>
snmp setauthkey <username> <Privkey>
snmp addgroup <GroupName> [Security Level] <ReadView>
<WriteView> <NotifyView>
Explanation:
Security Level:1 no_auth no_priv, 2 auth no_priv, 3 auth priv
ReadView: <string> or NULL for None
WriteView: <string> or NULL for None
NotifyView: <string> or NULL for None
snmp delgroup <GroupName >
snmp showgroup
snmp addview <ViewName> <OID > [Type]
Explanation:
ViewName: <string>
OID:<string>
Type:1: included, 2: excluded