Related Manuals for D-Link DWL-3200A
Summary of Contents for D-Link DWL-3200A
- Page 1 DWL-3200AP 802.11b/g Access Point Command Line Interface Reference Manual First Edition (January 2006) RECYCLABLE...
- Page 2 Table of Contents Using the CLI ..................................................1 CLI Commands..................................................7 First-Time Configuration Examples ..........................................19...
- Page 3 802.11 a/g Dual Band Access Point Command Line Interface Manual SING THE The DWL-3200AP can be accessed by Telnet. Using Microsoft Windows Operation system as example, open the Command Prompt on the computer that will be used for configuring and managing the AP and enter telnet and IP address of DWL-3200AP in the first line.
- Page 4 802.11 a/g Dual Band Access Point Command Line Interface Manual Type “admin” for the D-Link Access Point login username in the screen above and press Enter. The following screen opens: Press Enter as there is no initial password. The following screen opens to indicates you have successfully logged into the DWL-3200AP.
- Page 5 802.11 a/g Dual Band Access Point Command Line Interface Manual There are a number of helpful features included in the CLI. Entering the “?” command and then pressing Enter will display a list of all of the top-level commands. The same information can also be displayed by entering “help”.
- Page 6 802.11 a/g Dual Band Access Point Command Line Interface Manual When you enter a command without all of its required parameters, the CLI will prompt you with a list of possible completions. For example, if “tftp” was entered, the following screen opens: This screen displays all the possible command completions for “tftp”...
- Page 7 802.11 a/g Dual Band Access Point Command Line Interface Manual OMMAND YNTAX The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax.
- Page 8 802.11 a/g Dual Band Access Point Command Line Interface Manual : colon Purpose Separates two or more mutually exclusive items in a list, one of which must be entered. Syntax set antenna <1:2:best> Description In the above syntax example, you must specify either 1, 2 or best.
- Page 9 802.11 a/g Dual Band Access Point Command Line Interface Manual CLI C OMMANDS The following is a complete list of the Command Line Interface (CLI) commands along with their respective arguments. Access Point CLI command Function Syntax Config Commands: Select WLAN Adapter to configure. Only WLAN 1 is available for config wlan config wlan [0:1] configuration.
- Page 10 802.11 a/g Dual Band Access Point Command Line Interface Manual dhcps static dns set static <id> pool dns dhcps static <id> dns <x.x.x.x> dhcps static wins set static <id> pool wins dhcps static <id> wins <x.x.x.x> dhcps static domain set static <id> pool domain name dhcps static <id>...
- Page 11 802.11 a/g Dual Band Access Point Command Line Interface Manual get fragmentthreshold Display Fragment Threshold in bytes get fragmentationthreshold get frequency Display Radio Frequency (MHz) get frequency get gateway Display Gateway IP Address get gateway get groupkeyupdate Display Group Key Update Interval (in Seconds) get groupkeyupdate get hardware Display Hardware Revisions of WLAN Components...
- Page 12 802.11 a/g Dual Band Access Point Command Line Interface Manual get ssidsuppress Display SSID Suppress Mode as enabled or disabled get ssidsuppress get station Display Client Station Connection Status get station get SuperG Display SuperG Feature Status of enabled or disabled get SuperG get systemname Display Access Point System Name...
- Page 13 802.11 a/g Dual Band Access Point Command Line Interface Manual get multi-idv-acct-sta [index] Dislay Individual Accounting State for Multi-SSID get multi-idv-acct-sta [index] get multi-idv-acct-srv [index] Dislay Individual Accounting Server for Multi-SSID get multi-idv-acct-srv [index] get multi-idv-acct-port [index] Dislay Individual Accounting Server Port for Multi-SSID get multi-idv-acct-port [index] Help Command: Help...
- Page 14 802.11 a/g Dual Band Access Point Command Line Interface Manual set diap Enable or Disable DIAP set diap [disable:enable] set dtim Set Delivery Traffic Indication Message Beacon Rate. Default is 1 set dtim <1-255> set encryption Enable or Disable Encryption Mode set encryption [disable:enable] set eth2wlan [0:1] set eth2wlan...
- Page 15 802.11 a/g Dual Band Access Point Command Line Interface Manual set roguebandselectstatus set roguebandselectstatus [disable:enable] set roguebandselect set roguebandselect Note: After enter this command, the CLI will list the security type for selection set radiusname <DNS name::xxx.xxx.xxx.xxx> set radiusname Set RADIUS Server name or IP address Explanation: <xxx.xxx.xxx.xxx>...
- Page 16 802.11 a/g Dual Band Access Point Command Line Interface Manual set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs] Set WMM (EDCA) parameters used by STAs in this BSS [txOpLimit] [acm] Expanation: AC number: 0->AC_BE set wmmParamBss ac 1->AC_BK 2->AC_BK 3->AC_BK Exampble: set wmmParamBss ac 0 4 10 3 0 0 set wmmParamBss ac [AC number] [logCwMin] [logCwMax] [aifs]...
- Page 17 802.11 a/g Dual Band Access Point Command Line Interface Manual Set Telnet Access/SSL Mode to enabled or disabled set telnet <0:1:2> Explanation: set telnet 0=disable telnet and enable SSL: 1=enable telnet and disable SSL: 2 = disable both telnet and SSL> set timeout Set Telnet Timeout in seconds, 0 is never and 900 seconds is the set timeout <0-900>...
- Page 18 802.11 a/g Dual Band Access Point Command Line Interface Manual snmp delview <ViewName> <OID > Explanation: snmp delview Delete User View ViewName: <string> OID: <string> or all for all OID snmp showview Show User View snmp showview snmp editpubliccomm Edit public communication String snmp editpubliccomm <publicCommunityString>...
- Page 19 802.11 a/g Dual Band Access Point Command Line Interface Manual tftp update Update the file to the device. tftp update tftp info Information about the TFTPC setting. tftp info SSH Commands ssh showalgorithm Show SSH Algorithm ssh setalgorithm Set SSH Algorithm ssh setalgorithm [0 -12] [enable/disable] Explanation: Algorithm: 0:3DES...
- Page 20 802.11 a/g Dual Band Access Point Command Line Interface Manual rstp setstp Modify Spanning Tree Settings rstp setstp maxage [6 – 40] rstp setstp hellotiem [1-10] rstp setstp forwarddely [4-30] rstp setstp priority [0-61440], (note: 0i shte highest) rstp setstp version [1:2], (note: 1 is st)p and 2 is rstp) rstp setstp txholdcount [1-10] rstp setstp fbpdu[0-:1], (note: 0 is disduble and 1 is enable) rstp getstp...
- Page 21 Many users will want to set a new IP address for the DWL-3200AP. This will also require setting an IP mask and a Gateway IP address. The following is an example in which the AP’s default IP address of 192.168.0.50 is changed to 192.168.0.55. D-Link Access Point wlan1 -> set ipaddr 192.168.0.55 IP Address: 192.168.0.55 D-Link Access Point wlan1 ->...
- Page 22 The following is an example in which the authentication is set to Shared-Key. D-Link Access Point wlan1 -> set authentication shared-key Authentication Type: Shared-Key D-Link Access Point wlan1 -> set key 1 40 1234567890 Shared Key 1, size 40: 1234567890 D-Link Access Point wlan1 -> set key 1 default Default Key: 1 D-Link Access Point wlan1 ->...
- Page 23 802.11 a/g Dual Band Access Point Command Line Interface Manual The following is an example in which the authentication is set to WPA. D-Link Access Point wlan1 -> set authentication wpa Authentication Type: WPA D-Link Access Point wlan1 -> set encryption enable Encryption: Enabled D-Link Access Point wlan1 ->...