D-Link DWL-3200A Command Line Interface Reference Manual page 19

tftp update Update the file to the device.
tftp info Information about the TFTPC setting.
SSH Commands
ssh showalgorithm Show SSH Algorithm
ssh setalgorithm Set SSH Algorithm
ssh showuser Show SSH User
ssh setrekey Set SSH Rekey
ssh loaddefault Load SSH Default Setting
Routing Commands (Spaning Tree Protocol)
rstp setstate Enable or Disable Spanning Tree Protocol supporting in VLAN / Multi-
SSID
rstp getstate Show Spanning Tree State
802.11 a/g Dual Band Access Point Command Line Interface Manual
17
tftp update
tftp info
ssh setalgorithm [0 -12] [enable/disable]
Explanation:
Algorithm: 0:3DES
1:AES128
2:AES192
3:AES256
4:Arcfour
5:Blowfish
6:Cast128
7:Twofish128
8:Twofish192
9:Twofish256
10:MD5
11:SHA1
12:Password)
Example:
1. Disable 3DES algorithm support
ssh setalgorithm 0 disable
ssh showuser
ssh setrekey [0-3]
Explanation:
0:10Min
1:30Min
2:60Min
3:Never)
ssh loaddefault
rstp setstate [0:1]
Explanation: 0=disable:1=enable
rstp getstate