Decals; Operating Symbols - Troy-Bilt Super Bronco Operator's Manual

Decals

For your safety and the safety of others, vari-
ous safety and operational decals are located
on your unit (see Figure 1-2).
Keep the decals clean and legible at all times.
Contact your local service dealer or the factory
for replacements if any decals are damaged or
missing.
Refer to the Parts List pages in this Manual for
decal locations, descriptions and part num-
bers.

Operating Symbols

Various symbols (shown here, with word descriptions)
may be used on the tiller and engine.
NOTE: Your unit may not have all of the symbols.
FAST SLOW
Starting Stabilization
Message (on engine)
Figure 1-2: Location of safety and operating decals.
CHOKE
ON
STOP TILLER DIRECTION
TO AVOID SERIOUS INJURY:
• READ THE OWNER'S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN-
CLOGGING TINES OR MAKING REPAIRS.
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS
YOU.
Forward Clutch Bail
R
CHOKE REVERSE
ROTATING TINES
OFF
LEVER DIRECTION
WARNING
5
Reverse Clutch Control
Operating Instruction
(Super Bronco & Pro-Line)
Warning Messages
Hot Surfaces Warning
BAIL
BAIL
ENGAGED
DISENGAGED