Safety Decals - Troy-Bilt GARDEN WAY 12214-5.5HP Owner's Manual

Section 1: Safety
Decals
For your safety and the safety of others,
Keep the decals clean and legible at all
various safety and operational decals are times. Contact your local service dealer
located on your unit (see Figure 1 below), or the factory for replacements if any
decals are damaged or missing.
Refer to the Parts List at the back of this
Manual for decal locations, descriptions
and part numbers.
Forward Clutch Bail
Operating instruction
Reverse Clutch Control
Operating Instruction
Starting Stabilization
Message (on engine)
Warning Messages
Hot Surfaces/Moving Belts
Warning (on belt cover)
Figure 1: Location of Safety and Operating Decats.
Operating Symbols
Various symbols (shown here, with word
descriptions) are used on the tiHer and engine
(your unit may not have all of the symbols).
^ •At ^
FAST SLOW
CTHD
CHOKE
ON
CHOKE
OFF
TILLER DIRECTION
R
REVERSE
ROTATING
TINES
n N
BAIL
ENGAGED
BAIL
DISENGAGED
LEVER DIRECTION
WARNING
TO AVOID SERIOUS INJURY:
• READ THE OWNER'S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UNCLOG¬
GING TINES OR MAKING REPAIRS.
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS YOU.