Setting Up Preconfigured Environments For Master Subordinate Ds8000 - IBM DS8000 User Manual

Listing all registered subordinate DS8000s
From the SRA installation directory, issue the following command to list all
registered subordinate DS8000s:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegSubStorage list
Listing local or peer registered subordinate DS8000s
From the SRA installation directory, issue the following command to list all local
registered subordinate DS8000s:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegSubStorage list local
Issue the following command to list peer registered subordinate DS8000s:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegSubStorage list peer
Showing help information
From the SRA installation directory, issue the following command to show help
information:
jre\bin\java.exe -cp lib\DS8K_Java_Client.jar RegSubStorage
The information is delivered in the following format:
Usage:
RegSubStorage [list] <local | peer>
RegSubStorage [add | delete] [local | peer] [Machine Serial/HMC IP Address]
eg. Add peer subordinate storage:
RegSubStorage add peer IBM.2107-1234567/192.168.1.1
eg. delete peer subordinate storage:
RegSubStorage delete peer IBM.2107-1234567/192.168.1.1
Setting up preconfigured environments for Master
Subordinate DS8000
If you select the Pre-Configured option, some configuration is needed before SRA
can function properly.
Procedure
Click IBMDS8000SRAUtil.exe to set up the Master Subordinate DS8000 (see
Figure 23 on page 33). The subordinate storage message is displayed in the panel.
32
IBM DS8000 Storage Replication Adapter