Table of Contents
Advertisement
RUGGEDCOM RS969
Installation Guide
POWER LED 1/POWER LED 2
ALARM LED
Failsafe Alarm Relay
Power Supply Terminal
RS-232 Console Port
Copper/Fiber Ethernet Ports
Section 1.3
Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RS969:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Phillips screwdriver
4 x #6-32 screws
Section 1.4
Cabling Recommendations
Siemens recommends using RUGGEDCOM industrial Ethernet shielded cables for all Ethernet ports.
Siemens does not recommend the use of copper cabling of any length for critical, real-time substation automation
applications. All copper Ethernet ports on RUGGEDCOM products include transient suppression circuitry to protect
against damage from electrical transients and conform with IEC 61850-3 and IEEE 1613 Class 1 standards. This
means that during a transient electrical event, communications errors or interruptions may occur, but recovery is
automatic.
Required Tools and Materials
State
Yellow (Solid)
Yellow (Blinking)
Off
Illuminates when power is supplied to the associated internal power supply.
Indicates when an alarm condition exists.
Latches to default state when a power disruption or other alarm condition occurs. For more
information, refer to:
•
Section 2.4, "Connecting the Failsafe Alarm Relay"
•
Section 5.2, "Failsafe Alarm Relay Specifications"
The power supply port. For more information, refer to:
•
Section 2.5, "Connecting Power"
•
Section 5.1, "Power Supply Specifications"
For interfacing directly with the device and accessing initial management functions. For
information about connecting to the device via the console port, refer to
"Connecting to the
For information about available copper and fiber Ethernet ports, refer to
Communication
Tools/Materials
Device".
Ports.
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a panel.
For mounting the device to a panel.
Description
Link established
Link activity
No activity
Section 3.1,
Chapter 4,
Purpose
Chapter 1
Introduction
5
Advertisement
Table of Contents
