Avaya Merlin Magix Configuration Note page 5

Avaya
C o m m u n i c a t i o n s A p p l i c a t i o n s G r o u p
AuxEquip à à VMS/AA
à à TransferRtn à à Drop à à Dial
9) à à 4
no. of rings (0
-
à à Enterà à TT Duration à à Drop
à à Dial no. of ms (50
200 ms, in
–
increments of 25 ms) à à 75
à à Enter à à TT Interval à à Drop à à
Dial no. of ms (50 200 ms, in
–
increments of 25 ms)
à à 50 à à Enter à à Back à à Back
Display the Octel 100 Ports
Maintenance à à Ports à à Stations
à à Status
Octel 100 Configuration Note (7007)
Avaya Merlin Magix
At this point, the system will restart as noted above. To continue
programming, re-enter system programs.
Program the Voice Mail System/Automated Attendant Options as follows:
Magix's Mode All
Factory Setting touch-tone duration: 100 ms
Interval between digits: 50 ms
Number of rings before transfer sent to backup: 4
From the System Programming Menu
Select AuxEquip
Select VMS/AA
From the VMS/AA screen, select TransferRtn. This parameter, Transfer
Return, represents the number of rings before calls transferred by the Octel
100 are sent to a designated backup position. Set it to "0" to disable this
feature. If supervised transfers are used, this parameter should either be
disabled or set higher than the Max Rings in the Mailbox Class of Service.
The default value for Transfer Return is 4. To modify this parameter, erase
the current setting, using the Drop key. Enter the desired value and press
Enter.
From the VMS/AA screen, select TT Duration. This parameter should be
set to 75 (milliseconds). If it is not, erase the current setting, using the
Drop key and enter 75. Press Enter to save your entry.
From the VMS/AA screen, select TT Interval. This parameter should be
set to 50 (milliseconds). If it is not, erase the current setting, using the
Drop key and enter 50. Press Enter to save your entry.
Press Exit twice to return to the System Programming menu.
5.3 DISPLAY THE OCTEL 100 PORTS
Display numbers of equipment to be used for Octel 100. View the
extension profile by using this procedure:
From the System Programming Menu
Select Maintenance
Select Ports
Select Stations
Select Status
The profile shows:
• "T/R" if the port is programmed as T/R.
• "UNEQUIPPED" if the port is programmed as ETR and an MLS
or ETR telephone is not connected to the ports.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions
C o n f i d e n t i a l
disclaimer on page 1
5
P a g e