Avaya Merlin Magix Configuration Note page 4

Avaya
C o m m u n i c a t i o n s A p p l i c a t i o n s G r o u p
Avaya Merlin Magix System
Programming
System à à Mode à à Select mode
(Hybrid/PBX) à à Enter
Octel 100 Configuration Note (7007)
Avaya Merlin Magix
system maximum of 20 VMI Calling Groups, and any one Calling
Group may have a maximum of 20 members. An extension may
be a member of only one Calling Group.
5.1 DEFAULT NUMBERING SCHEME
The following figure is a 2-digit map of the factory settings in gray spaces.
1 LDN (QCC Queue)
2 Remote Access
Extensions can be renumbered to any number shown in the white spaces.
5.2 AVAYA MERLIN MAGIX SYSTEM PROGRAMMING
Refer to the Programming section in the Avaya Merlin Magix manual for
information on entering, saving, and exiting database programming.
The factory setting is Hybrid/PBX, we recommend the Magix system be
configured as a hybrid/PBX. This programming must be done when the
system is idle. In addition, this programming will cause the system to
restart when you are finished. Therefore, choose an appropriate time for
this procedure.
All
Magix's Mode
Hybrid/PBX
Factory Setting
From the System Programming Menu
Select System
Select Mode
Select Hybrid/PBX
Press <Enter> to save.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the
Avaya Inc. PROPRIETARY. Use pursuant to Company instructions
C o n f i d e n t i a l
disclaimer on page 1
4
P a g e