GMC Buick Encore GX 2020 Owner's Manual page 261

260 Driving and Operating
: Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ : Press the control up briefly
to resume the previous set speed or
to increase vehicle speed if ACC is
already activated. To increase
speed by about 1 km/h (1 mph),
press RES+ up briefly. To increase
speed to the next 5 km/h (5 mph)
mark on the speedometer, hold
RES+.
SET : Press the control down
briefly to set the speed and activate
ACC or to decrease vehicle speed if
ACC is already activated. To
decrease speed by about 1 km/h
(1 mph), press SET down briefly.
To decrease speed to the next
5 km/h (5 mph) mark on the
speedometer, hold SET .
: Press to disengage ACC
without erasing the selected set
speed.
: Press to select a following gap
setting for ACC of Far, Medium,
or Near.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster 0 107.
The increment value used depends
on the units displayed.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
A Driver Information Display (DIC)
message displays. See Vehicle
Messages 0 134.
ACC Indicator
When ACC is engaged, a green
indicator will be lit on the instrument
cluster and the following gap will be
displayed. When the regular cruise
control is engaged, a green
indicator will be lit on the instrument
cluster; the following gap will not
display.
When the vehicle is turned on, the
cruise control mode will be set to
the last mode used before the
vehicle was turned off.
*.
Warning
Always check the cruise control
indicator on the instrument cluster
to determine which mode cruise
Regular Cruise
Control Indicator
(Continued)