GMC Buick Encore GX 2020 Owner's Manual page 186

Direct commands might be more
clearly understood by the system.
An example of a direct command
would be Call <number>.
Examples of these direct commands
are displayed on most of the
screens while a voice session is
active. If Phone or Phone
Commands, is spoken, the system
understands that a phone call is
requested and will respond with
questions until enough details are
gathered to make a call.
If a cell phone number has been
saved with a name and a place, the
direct command should include
both, for example Call <name>
at work.
Using Voice Recognition for
List Options
When a list is displayed, a voice
prompt will ask to confirm or select
an option from that list.
When a display contains a list, there
may be options that are available
but not displayed. The list on a
voice recognition screen functions
the same as a list on other displays.
Scrolling or flinging can be used to
help display other entries from
the list.
Manually scrolling or paging the list
on a display during a voice
recognition session suspends the
current voice recognition event and
plays the prompt Please select
manually or touch the Back icon on
the infotainment display to try
again.
If manual selection takes more than
15 seconds, the session terminates
and prompts that it has timed out.
The display returns to the display
where voice recognition was
initiated.
The Back Command
Say Back or touch the Back icon
on the infotainment display to go to
the previous menu.
If in voice recognition, and Back is
spoken all the way back to the
starting display, and then Back is
spoken one more time, the voice
recognition session will cancel.
Infotainment System
Help
Say Help on any voice recognition
display and the help prompt for the
display is played.
Voice Recognition for the
Radio
If browsing the audio sources when
voice is touched, the voice
recognition commands for AM, FM,
and SiriusXM (if equipped) are
available.
Switch to AM : Switch bands to
AM and tune to the last AM radio
station.
Switch to FM : Switch bands to
FM and tune to the last FM radio
station.
Switch to SXM : Switch bands to
SiriusXM and tune to the last
SiriusXM channel.
Tune to <AM frequency> AM :
Tune to the radio station whose
frequency is identified in the
command (like nine fifty ).
185