M.2 Solid-State Drive - Lenovo ThinkCentre M70s Hardware Maintenance Manual

c. Remove the M.2 solid-state drive.
d. Remove the film that covers the thermal pad, if any. Then, install the M.2 solid-state drive.
e. Insert the heat sink with the M.2 solid-state drive.
f. Insert the stopper.
5. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.

M.2 solid-state drive

Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
.
Chapter 6 Hardware removal and installation
75