5. Remove the M.2 solid-state drive bracket.
6. Install the M.2 solid-state drive bracket.
7. Reinstall all the removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Wi-Fi card
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 61.
2. Remove the front bezel. See "Front bezel" on page 62.
3. Remove the drive bay assembly. See "Drive bay assembly" on page 65.
78
M70s and M80s Hardware Maintenance Manual