Restore Factory Settings; Software Update - Harman JBL BAR 9.1 Owner's Manual

9. RESTORE FACTORY SETTINGS

By restoring the default settings defined at factories. you remove
all your personalized settings from the soundbar.
• On the soundbar, press and hold
seconds.
→ "
" is displayed.
→ The soundbar shows "
goes to standby mode.
20 20
and for more than 10
" and " " and then,

10. SOFTWARE UPDATE

For optimal product performance and your best user experience,
JBL may offer software updates for the soundbar system in the
future. Please visit www.jbl.com or contact JBL call center to
receive more information about downloading update files.
Updating online
• On the soundbar, mount the two detachable speakers when
" " is displayed.
→ " ": Software updating underway
→ " ": Software updating completed
NOTES:
− For automatic online upgrading when update software is available,
make sure that the two detachable speakers have been docked onto
the soundbar.
Updating through a USB storage device
1. Check that you have saved the software update file to the root
directory of a USB storage device.
2. Check that you have docked the detachable speakers onto
the soundbar. Connect the USB device.
UPDATE FOUND
USB