Configure Menu; Select Language - Honeywell XNX-AM Series Technical Manual

XNX Universal Transmitter

Configure Menu

Functions in the Configure Menu and the security levels required
to change them are explained in this table.
Security
Symbol Description
Level

Select Language

Set Date & Time
Set mV Sensor Type
Set mA Sensor Type
Gas Selection
Range & Alarms
Latching/Non-
latching
Set Units
mA Levels
WARNING
!
Warning: When configuring or communicating with the transmitter using the local
user interface, resume monitoring by exiting all menus and returning to the General
Status menu manually. No time outs are invoked.
NOTE
!
Note: With the exception of Inhbit Mode, gas measurement continues in the
background allowing users to navigate screens without taking the transmitter offline.
Installation and Operation
Symbol Description
1 Calibration Interval
Accept New Sensor
1

Type
2 Beam Block Options
2 Path Length
2 Unit ID
2 Relay Options
2 Fieldbus Options
2 Configure Security
2
Select Language
Available languages for the transmitter are English, Italian,
French, German, Spanish, Russian, Mandarin, and Portuguese.
Security
Level
2
2
2
2
2
Different screens are used to display each of the eight available
2
languages, one language per screen. Each language screen
will appear in three languages: the selected language, Russian,
2
and Mandarin. To select a new display language, use the
2
switches to navigate through the selections. Use
selection or to discard the selection and return to the previous
✖
menu.
64
Figure 62. Select Language menu
Figure 63. Language Selection Screen
Figure 64. Accept Language Change screen
to make the
✓