Calibration; Configuration - Honeywell XNX-AM Series Technical Manual

XNX Universal Transmitter

Calibration

The Calibration menu permits zero or span calibrations and bump
testing. Additionally, when fitted with a Searchline Excel sensor,
the Calibration menu displays the optical signal strength for
mechanical alignment. The gas calibrate operation is shown below.
Figure 243. Gas calibrate method
CAUTION
!
Caution: Do not back out of a menu selection while a calibration is in progress.
HART Protocol

Configuration

All user settings of the transmitter can be made either at the
local user interface or over HART. The configuration menu
facilitates convenient setup of alarm levels as shown in
244. Methods are also provided to set time, units, and other
parameters.
188
Figure 244. Set range and alarm
Figure