Multitech Rcell 100 Series Cellular Modems - Multitech rCell 100 Series Manual

MultiTech rCell 100 Series cellular modems

For HTTP SMS support we are implementing the HTTP API provided by
modems.
The rCell 100 Series modems support a wide range of cellular networks (GSM/CDMA) and countries.
Please see our modem information page for the latest information regarding supported modems.
https://www.exele.com/software-products/topview/resources/cellular-modems-sms/
In the US we are using the following models:
•
Older models
o MTR-LAT1-B07 (AT&T/GSM, requires Mini SIM card)
o MTR-LVW2-B07 (Verizon, requires Mini SIM card)
•
Newer models
o MTR-LNA7 (AT&T/GSM and Verizon, requires Micro SIM card)
▪
▪
▪
You will need to obtain a SIM card (correct size) from a cellular provider for use with the cellular
modem. Please check with MultiTech for the correct rCell 100 Series modem to support your cellular
carrier.
GSM: supported in TopView 6.33 and later
Verizon:
•
Outgoing: supported in TopView 6.33 and later
•
Incoming (alarm acknowledge):
Not supported with firmware 5.1.x
Supported with firmware 5.2.1 and TopView 6.34
SIM Inserted Status: TopView can return the status of the SIM card
(inserted/not inserted) by querying the SIM card status from the modem.
"SIM inserted" status for the LNA7 currently returns "not inserted" even if the
SIM card is inserted in TopView 6.33 because the SIM status command used for
the older models is not available for the LNA7.
TopView 6.34 can return the correct status but multiple insert/removal of the
SIM may not be correctly recognized.
MultiTech in their rCell 100 Series