Chapter 3 - Antenna And Activation Information; Notice Regarding Compliance With Fcc, Eu, And Industry Canada Requirements For Rf Exposure; Cellular Antenna; Cellular Antenna Specifications - Multitech MultiConnect Cell User Manual

Hide thumbs Also See for MultiConnect Cell:

Table of Contents

Chapter 3 – Antenna and Activation Information

Notice regarding Compliance with FCC, EU, and Industry Canada

Requirements for RF Exposure

The antenna intended for use with this unit meets the requirements for mobile operating configurations and for

fixed mounted operations, as defined in 2.1091 of the FCC rules for satisfying RF exposure compliance. This device

also meets the European RF exposure requirements of EN 62311. If an alternate antenna is used, consult user

documentation for required antenna specifications.

Compliance of the device with the FCC, EU and IC rules regarding RF Exposure was established and is given with

the maximum antenna gain as specified above for a minimum distance of 20 cm between the devices radiating

structures (the antenna) and the body of users. Qualification for distances closer than 20 cm (portable operation)

would require re-certification.

Wireless devices could generate radiation. Other nearby electronic devices, like microwave ovens, may also

generate additional radiation to the user causing a higher level of RF exposure.

Cellular devices were approved with the following antenna:

Manufacturer:

Model Number:

MultiTech ordering information:

Model

ANLTE4V2-1HRA

ANLTE4V2-2HRA

ANLTE4V2-10HRA

ANLTE4V2-50HRA

Mtc-mng6 Mtc-mng6-b01 Mtc-mng6-b03