User Definable Text Messages - Panasonic External Presentation unit 1728 Technical Description

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00290 Rev: 1
7
Technical Description External Presentation unit 1728

User definable text messages

The user definable text messages (alarm texts) are depending on
which mode the unit is running in.
In SW mode 1728 - 1587
In the c.i.e., each alarm point (zone – address) and each zone can have
an individual user definable text message
alphanumeric display by alarm, see the Planning and Operating
Instructions for the system respectively.
The user definable text messages shown in the c.i.e. will also be sent
to each ext. Presentation unit and shown in its display.
As an alternative, text messages for all or selected alarm points / zones
can be stored in each ext. Presentation unit. If so, these text messages
will be shown instead of the text messages sent out from the c.i.e.
The priority order is as follows:
1. Point alarm text stored in the ext. Presentation unit.
2. Zone alarm text stored in the ext. Presentation unit.
3. Default alarm text stored in the ext. Presentation unit.
4. Text sent out from the c.i.e.
When text messages shall be stored in all or in some ext. Presentation
units, the unique text messages are created in Win512 / Win128 and
downloaded when the c.i.e. site specific data (SSD) is downloaded.
NOTE! It is also possible to select which fire alarms that shall be
presented in the ext. Presentation unit respectively, see chapter
"Selective alarm presentation", page 6.
In SW mode 1728 - 1582
The user definable text messages shown in the c.i.e. will also be sent
out to each ext. Presentation unit and shown in its display.
14
Each text message (up to 40 alphanumeric characters) will be shown on
the second row. The text messages are created and downloaded via Win512 /
Win128.
15
14
presented in the